10
Operaon (connued)
Problem Soluon
My Motorized EasyShade
retracts but will not fully
close into the Aluminum
Appendix A
Appendix B, Programming the
Fabric is stuck inside the
Aluminum Housing
My Motorized EasyShade
rolls out and keeps going
and the Fabric Panel begins
Appendix A
Appendix B
Motorized EasyShades to
operate on one master
See Appendix C, Programming Instrucons - Mul Channel Remote
Transmier.
Can I use more than one
control one Motorized
EasyShade?
See Appendix C, Programming Instrucons - Mul Channel Remote
Transmier
It is recommended to always unplug all Motorized EasyShades except the one
What if I lose my Remote
damaged?
motor?
800-670-7071 to purchase a
The Motorized EasyShade
only operates while the
UP
or DOWN
If the problem persists, please call Customer Service for assistance at
800-670-7071
TROUBLESHOOTING