Page | 24
5.2. Switching ON/OFF
Once the inverter has been correctly installed and the batteries have been connected,
press the ON/OFF button (located on the left side of the case) to activate the system.
When the system is connected without a battery but connected with either PV or grid and
the ON/OFF button is switched off, the LCD will still illuminate (display will show off). In
this condition, when switching on the ON/OFF button and selecting ‘No Battery’, the
system can still work.
5.3. Home Page
Press the Esc button any page to access the home page:
Daily readings Real time readings
What this page displays:
Total daily power into the battery (kWh).
Total daily power out of the battery (kWh).
SOC (State of charge of the battery) (%).
Total daily solar power produced in (kWh).
Total hourly usage of the generator (Time).
Total daily power sold to the grid (kWh).
Total daily power bought from the grid (kWh).
Real-time solar power in (kW).
Real-time load power in (kW).
1. Customer name
2. Access settings menu page
3. Access solar history
4. Access system status page
5. Access system status page
6. Access grid history
7. Access system flow page
Real-time battery charge power
in (kW).
Real-time grid power in (kW).
Serial number.
Time date.
Fault condition.
Access stats pages.
Access status page.
Access fault diagnostic page.
To Next Page
Loading...
Need help?
General