Page | 56
F15 AC_OverCurr_Failure F47 AC_OverFreq_Fault
F16 GFCI_Failure F48 AC_UnderFreq_Fault
F17 Tz_COM_OC_Fault F49 AC_U_GridCurr_DcHigh_Fault
F18 Tz_Ac_OverCurr_Fault F50 AC_V_GridCurr_DcHigh_Fault
F19 Tz_Integ_Fault F51 AC_W_GridCurr_DcHigh_Fault
F20 Tz_Dc_OverCurr_Fault F52 AC_A_InductCurr_DcHigh_Fault
F21 Tz_GFDI_OC_Fault F53 AC_B_InductCurr_DcHigh_Fault
F22 Tz_EmergStop_Fault F54 AC_C_InductCurr_DcHigh_Fault
F23 Tz_GFCI_OC_Fault F55 DC_VoltHigh_Fault
F24 DC_Insulation_Fault F56 DC_VoltLow_Fault
F25 DC_Feedback_Fault F57 AC_BackFeed_Fault
F26 BusUnbalance_Fault F58 AC_U_GridCurr_High_Fault
F27 DC_Insulation_ISO_Fault F59 AC_V_GridCurr_High_Fault
F28 DCIOver_M1_Fault F60 AC_W_GridCurr_High_Fault
F29 AC_AirSwitch_Fault F61 AC_A_InductCurr_High_Fault
F30 AC_MainContactor_Fault F62 AC_B_InductCurr_High_Fault
F31 AC_SlaveContactor_Fault F63 ARC_Fault
F32 DCIOver_M2_FaulT F64 Heatsink_HighTemp_Fault
If you need further help please refer to the Sunsynk website where you will find training
videos and frequently asked questions www.sunsynk.com.
The Single-Phase Hybrid Inverter is designed for grid-connected operation.
The inverters meet the main standards concerning safety and electromagnetic
compatibility. Before leaving the factory, all inverters undergo rigorous testing to
ensure the inverter can operate reliably as presented in Chapter 3 ‘Technical
Specifications’.
NOTICE
To Next Page
Loading...
Need help?
General