SINGLE PHASE HI 3.6/5kW | Installer Manual2
Table of Contents
SAFETY 3
General Safety 3
Symbols/Safety Signs 3
Safety Instructions 5
Product Disposal 5
PRODUCT INTRODUCTION 6
Product Overview 6
Product Size 7
Product Features 8
Basic System Architecture 9
TECHNICAL SPECIFICATIONS 10
INSTALLATION 12
Parts List 12
Selecting the Mounting Area 13
Mounting the Inverter 14
Battery Connection 15
Function Port Denition 17
Recommended DC Battery Protection 18
Connecting a Lithium Battery 18
Lead-Acid Battery Temperature Sensor 20
Connecting the AC 21
Recommended AC Surge Protector 22
PV Connection 23
PV Module Selection 23
PV Module Wiring 23
PV Protection 24
Installing the CT Coil 24
Meter Connection 26
System Connection for the CHNT Meter 26
Earth Connection (MANDATORY) 26
Wiring System for Inverter 27
Typical Application of Diesel Generator 28
Single-Phase Parallel Connection 29
Three-Phase Parallel Inverter 30
OPERATION 31
Switching ON/OFF 31
Display 31
LED Indicators 31
Function Buttons 31
LCD Operation Flow Chart 32
Home Page 33
Status Page 33
System Flow Page 34
Setup Page 35
Basic Setup 36
Set Time (Clock) 36
Set Company Name / Beeper / Auto dim 36
Factory Reset and Lock Code 37
Inverter Remote Control 38
Battery Setup Page 38
Generator & Battery Page 39
Battery Discharge Page 41
Setting Up a Lithium Battery 43
Program Charge & Discharge Times 49
Grid Supply Page 53
Paralleling Inverters Advanced Settings 57
Connecting the DRM’s 60
Advanced Function Setup 61
Solar Power Generated 61
Grid Power 62
Advanced Settings for Wind Turbines 63
Advanced Settings for Auxiliary Load 64
OPERATION MODES 67
Mode I: Basic 67
Mode II: Generator 67
Mode III: With Aux-Load 68
Mode IV: AC Couple 68
Mode V: Grid-Tied 70
FAULT CODES 70
COMMISSIONING 74
Start-Up / Shutdown Procedure 74
Inverter Commissioning Info 74
GDFI Fault 75
MAINTENANCE 75
APPENDIX A 76
APPENDIX B 77
APPENDIX C 77
APPENDIX D 77
APPENDIX E 77
To Next Page
Loading...
Need help?
General