SunSynk SYNK-5K-SG03LP1 - Grid-Tied Mode; FAULT CODES; Fault Code List and Descriptions

SINGLE PHASE HI 3.6/5kW | Installer Manual70
Mode V: Grid-Tied
Grid
Backup Load On-Grid Home Load
CT
Solar
AC cable DC cable
COM cable
To check the fault codes click on the FAULT CODES icon on the settings menu.
If any of the fault messages listed in the following table appear on your inverter and the fault has not been
removed after re-starting, please contact your local vendor or service centre. The following information is
required:
1. Inverter serial number.
2. Distributor or service centre of the inverter.
3. On-grid Power Generation Date.
4. The problem description (including the fault code and indicator status displayed on the LCD) with as much
detail as possible.
5. Owner’s contact information.
FAULT CODES