5
1.15 AVOID ACCIDENT BY CONTROL FAILURE
When the machine loses control, if someone tries
to mount on or stop machine, it will cause GBH or
death.
To avoid the machine losing control, pay attention to
the following proceedings:
z Place the machine on horizontal ground, try your best
not to stay on slope, and stop machine as following
procedures:
Lower the bucket to the ground.
Run engine at low revs for 3 minutes to cool down
machine.
Stop engine, take out key from key switch.
Switch off pilot control.
z If the machine has to stay on slope, use chocks to
block crawler, lower bucket, and plug bucket teeth
into ground.
z Fix the machine well to avoid accidental movement.
z Park the machine away from other machines at proper
distance.
1.16 PARK MACHINE SAFELY
Stop machine as following schedule:
z Place machine on horizontal ground.
z Lower the bucket to the ground.
z Run engine at low rev for 3 minutes.
z Place the timing handle at stop position, screw the
ignition key to “OFF” position.
z Switch off pilot control.
z Close window, top window, and cabin.
1.17 SAFE MAINTENANCE
z Attention of maintenance:
Before working, be aware of maintenance rules.
Keep the working area clean and dry.
Don’t allow injecting lubricant or maintaining to the moving machine.
Avoid body and clothing touching with transmission parts.
z Preparation for maintenance
Place the machine on horizontal ground.
Lower the bucket to the ground.
Run engine at low rev for 5 minutes.
Pull stop handle forward, stop engine, take out key from the switch.
Hang “DO NOT OPERATE” label at control lever.
Switch off pilot control.
To Next Page
Loading...
