20
8 —Work hour meter
The number on this device is the work time of this machine.
9 — Cooling Water temperature indicator
This indicates the engine cooling water temperature. The pointer is within green range when the
water temperature is normal; if it goes into the red range, it means water temperature is too high;
the LCD will flicker with buzzer alarming.
10—Fuel level indicator
If the fuel level is normal, green lamp comes on; if red lamp comes on and LCD flicker, that
means only little fuel in tank, it should check and fill fuel.
2.4 WANE CONTROL PANEL
1－Boom lamp switch
This switch turns on and off the boom lamp. This indicator turns on when the boom lamp turns
on, and the indicator is off when the boom lamp turns off.
2－windshield wiper switch
This switch turns on and off the cabin windshield wiper. When press this button, wiper starts
working, and the green lamp turns on, press the button again, green light turns off, which means
the wiper has stopped.
This is a two-gear switch, first half is the first gear (wipe and water-jet), the second half is the
second gear (wipe).(Simple cab has not this function)
Wane switch group of cab
Wane switch group of closed cab
To Next Page
Loading...
