22
2.6.2 INSTALLATION
Heater unit must be firm and not loose
after installation. Wire harness and hot
water tube circuit must be connected
reliably.
2.6.3 OPERATION
Ensure enough space for ventilation.
Do not store flammable or explosive
stuff near the air exit.
Heater work switch
I－heater fan rotates at low speed
II－heater fan rotates at high speed
2.7 RADIO
Well-known brand radio with strong aseismatic and dustproof capability is beautiful and durable.
12
11 101
23 13 4567
1089
AMS
RST
/ MUT
BND
/ST
CLK TUN-
TUN+
VOL+
SEL
VOL-
PWR
MO
For the heating system adopts engine cooling water as heat source, it is connected
with water tank, when ambient temperature is lower than 0°C and engine stops
working, empty water tank or add antifreeze to water tank in order to prevent heater
core crack.
FIG.2-8
z Be cautious to the operation of heater in
warm weather, because the coolant will
circulate in the heater even after the switch
is turned off.
z When the heater is not needed, do as the
follows to stop the circulation of coolant:
Park the machine on a level ground, shut down
the engine, open engine cover, shut down valve
It is recommanded that this system
should be applicated before engine
start-up, otherwise, there may be a
shortage of battery power.
To Next Page
Loading...
