88
Control levers don’t work
or work slowly.
1． The machine is out of use
for a long time, air
separates from oil and
floats in pilot control
pipeline and hydraulic
cylinder,etc.
2． No pressure or exceeding
pressure in pilot system.
3． Low hydraulic oil
temperature and high
viscidity of hydraulic oil
4． Hydraulic pump
malfunction.
5． Main safety relief valve
malfunction
1． Operate control levers
for several times.
2． Check hydraulic control
system, low-pressure
relief valve, and gear
pump.
3． Warm up machine.
4． Consult with your
dealer.
5． Consult with your
dealer.
A cylinder doesn’t work
or work slowly.
1． Corresponding pilot valve
malfunction
2． Corresponding
commutator valve
malfunction
3． Corresponding overload
valve malfunction
4． Hydraulic cylinder pole
damaged
5． Hydraulic cylinder interior
seals damaged
1． Repair
2． Consult with your dealer
3． Consult with your dealer
4． Consult with your dealer
5． Replace oil seals
Slewing platform don’t
slew, slew slowly, or slew
not smoothly.
1．Corresponding pilot valve
malfunction
2．Hydraulic motor
malfunction
3．Slewing retarder
malfunction
4．Slewing bearing
malfunction
5．Need to add lubricant
grease into the slewing
bearing.
1．Repair
2．Consult with your dealer
3．Consult with your dealer
4．Repair
5．Add lubricant grease
To Next Page
Loading...
