OPERATION & MAINTENANCE MANUAL SWE215F
Pay attention not to over fasten.
Replacing engine oil
11) Fill with oil through oil fill cap and check oil fill
volume until specific scale position on dipstick is
reached.
Engine oil capacity 25L
12) Cap oil filling port.
13) Start engine; run it unloaded at low speed for 5
minutes.
Check engine oil pressure indicator (red) on monitor to
make sure it goes off. If it’s still on, stop engine
immediately and identify the cause.
Check drain valve for any leakage.
Check dipstick for oil level.
To Next Page
Loading...
