SUNWARD SWE215F-5 - Measures for Fire Fighting; Preventing Splashing or Falling Objects; Prevention of Flying-Out Parts

OPERATION & MAINTENANCE MANUAL SWE215F
20
engine oil.
 Stop engine before refilling.
 Do not spill oil to hot surface or electrical equipments
of machine.
 Secure and lock oil cap after adding oil.
 Wipe off oil dirt; remove all flammable or explosive
material.
 Do not weld or cut pipelines that contain flammable
fluids.
 Keep wire terminals secured and clean.
 All leads must be free of damage. Prevent fire due to
short circuit of damaged leads and machine.
 Prevent spark due to static electricity or friction.
1.2.23 Measures for Fire Fighting
 Switch starting key to “OFF” position to stop engine.
 Remove fire extinguisher in cab.
 Get out of machine by utilizing handrail and steps.
 Contact fire department and colleagues and superior.
Extinguish fire with fire extinguisher.
1.2.24 Preventing Splashing or Falling Objects
 Wear protection glasses or goggles to avoid injury
resulting from fly-out and falling object (such as metal
particles or sand rock).
 When hitting, make working area off-limits to the
other person.
 Machine must be fitted with falling object protective
structure (FOPS) and front protective structure. If
machine is used in mining area or quarry where there
is a risk of falling rocks.
1.2.25 Prevention of Flying-Out Parts
 Bear in mind that lubricating grease in track tension
device is under high pressure. Do not remove parts
such as oil cup or valve etc to avoid injury.