SUNWARD SWE215F-5 - Safe Disposal of Liquids; Safe Disposal of Chemicals; 31 Waste Material Disposal; Prohibition of Unauthorized Modification on Machine

OPERATION & MAINTENANCE MANUAL SWE215F
22
 Fasten all connector parts prior to pressurizing.
 Use cardboard to locate leakage. Keep your hand and
body away from pressurized fluid.
 In case of accidents, consult a doctor experienced in
this kind of injury for medical care.
1.2.29 Safe Disposal of Liquids
 Considering that fuel is highly flammable, handle
them with extra care. In case that fuel is ignited, injury
or death may occur to persons.
 Always add fuel at open-air. Be sure to stop engine
before refilling fuel.
 Do not refill fuel while smoking or around naked
flame or spark.
 All fuel and most lubricant and coolant are flammable.
 Keep flammable fluid away from the area involves fire
hazards.
 Do not burn out or stab at pressurized container.
 Do not restore rags containing oil. They may be
ignited or self-ignited.
 Secure cap on refilling opening.
1.2.30 Safe Disposal of Chemicals
 Serious injury can occur by allowing hazardous
medical to make direct contact with person. Medicals
being used in the machine such as lubricant, coolant,
and binding admixture may be harmful.
1.2.31Waste Material Disposal
 Observe local laws and regulations to dispose of waste
material, such as fuel, coolant etc.
1.2.32 Prohibition of Unauthorized Modification
on Machine
 Any unauthorized modification to machine may
involve hazards.