Follow all safety regulations when the
machine lifts objects.
⚫ Don’t use damaged chain, wire rope, or
cord in lifting work.
⚫ Don’t move the load suddenly, don’t move
load on the top of human beings, and never
permit anybody to be adjacent to the load.
⚫ Ensure everybody is away from the lifted
objects until the chocks support the load
or the load has been stably placed on the
ground.
⚫ Fix superstructure and place the
traveling motor at the rear.
Don ’ t connect sling/chain to the bucket
teeth.
3) When the machine is traveling, dozer blade can’t hook any object, otherwise it will damage
dozer blade or crawler system.
4) When prop up machine with dozer blade, the ground should be plane to ensure dozer blade
touch ground stably.
Be careful when retract foreside working device
Don’t allow the bucket to collide with dozer blade.
Don’t allow dozer blade to touch roadblock
Don’t allow dozer blade to touch roadblock,
otherwise dozer blade, cylinder or other components
will be damaged
3.6 LIFT WORK
Lifting hook mark：
1) Sling/chain should tightly bind the load, the
workman should glove when bind
sling/chain.
2) Connect sling/chain with bucket lifting ring,
curled bucket and retracted arm.
3) Before start, uniform the hand signal with
signalman.
4) Acquaint with the positions of all workmen
in the range of work area.
To Next Page
Loading...
