SUNWARD SWE80B - Page 22

15
Figure 1.37.4
 Warning：Please stay away from the rotating area (As figure 1.37.5).
Figure 1.37.5
 Warning：Pay attention to machine‘s lifting capacity in operation (As figure 1.37.6).
Note figure with Y is hydraulic lifting capacity ca lculated by 87% of the gro ss weight
Figure with F is turn-over lifting capacity
： ；（ ）
； （ ）calcu lated by 7 5% of the gross weight
A The distance f rom slewing cen ter to load perpendicular：；
B The load is on the bucket, the dista nce between bucket m ounting pin and the groun d：；
WARNING
70机
Machine front Machine side
Machine front
Machine front Machine side
A
B
3m
2m
1m
0m
-1m
(Kg) (kg) (kg ) (kg ) (kg ) (kg ) (kg ) (kg)
MAX
4M 3M 2M
Machine front M ach ine side
4m Y1117.95 F776.2 5 / / Y101 7.90 Y103 5.30 / /
Y1187.55 F 573.75 Y1191.90 F616.25 Y1200.60 Y1209 .30 Y1222.35 Y1209.30
Y1270.20 F562.50 Y1291.95 F562.50 Y1518.15 F95 2.50 Y1979.25 F1620.00
Y1 344.15 F532.50 Y1426.80 F543.75 Y1718.25 F798.75 Y2583.90 F1271.2 5
Y1518.15 F491.25 Y1526.85 F502.50 Y1953.15 F772.50 Y2757.90 F1241.2 5
Y1622.55 F630 / / Y176 1.75 F720.00 Y2670.90 F1 072.50
6.0m
3.0m
4.0 m
2. 0m
1.0m
0m
-1.0m
-2.0m
-3.0m
-4.0m
6.0m
5. 0m
4.0m
3.0m
2 .0m 1.0m
0m
5.0m
Machine side
Figure 1.37.6