79
5.4.9 DPF Regeneration
5.4.9.1 Stationary Regeneration Requst Light
1Hz: When Reset Regeneration is active, and the DPF
Regeneration Disable Switch (REGMSW) is inhibited
and engine warming is done.
ON: When standby of Stationary EM mode or Recovery
Regeneration is active, and engine warming is done.
ON: When the standby of Stationary Allow mode is
active, and interlock SW is permitted, and REGMSW is
permitted and engine warming is done.
ON: When 50hr passed after Reset or Stationary or
Recovery Regeneration, and the REGMSW is inhibited,
and engine warming is done.
ON: When Regeneration is required.
To Next Page
Loading...
