21
7. Breaking/swing switch(optional)
8. Dozer blade conversion switch
9. Key switch
10. Cigar lighter
1 —Work lights switch
This switch turns the work light on and off. When press the switch, the work light and the green light turn on;
when press the switch again, the work light and the green light go out.
2 — Platform light switch
This switch turns the Cabin top light on and off. When press the switch, the cabin top light and the green light
come on; when press the switch again, the top light and the green light go out.
3 — Wiper switch
This switch turns cabin wiper on and off. When press this switch, wiper begin to work, green light comes on;
press this switch again, green light goes out, wiper stop work.
4 — Wahser switch
This switch turns washing water on and off. When press this switch, washing water begins to work, the light
comes on; press this switch again, the light goes out, washing water is turned off.
5 — Warning light switch
This switch turns the warning light on and off. When press the switch, the switch light flashes and the red light
turns on; when press the switch again, the red light turns off and the warning light stops flashing.
6 — High speed traveling switch
Press this switch, green light comes on, the machine is on high speed condition; press this switch again, green
light goes out, the machine is on low speed condition.
7 — Breaking/swing switch (optional)
This switch controls the movement conversion between boom swing and breaking works (if the machine
equipped with them)
8 — Dozer blade Conversion switch (optional)
This switch controls the movement of blade ,press the switch,then operate blade pilot valve ,blade starts to
work.(if the machine equipped with blade)
9 — Key switch (As figure 2.3.2)
① —OFF （engine stop）
To Next Page
Loading...
