Chapter 2: Installation
2-27
JTPM1
JIPMB1
S4
I-SATA3
I-SATA0
I-SATA1
JPL1
JPUSB1
JLED1
JVR2
JVR1
JPG1
JPAC1
JBT1
JSTBY1
JSD1
JF1
Rev. 1.00
BIOS
LICENSE
FOR HOME OR OFFICE USE
With FCC Standards
Tested to Comply
JPW2
JL1
JL2
JI2C1
JSPDIF_OUT
JPW1
MAC CODE
BAR CODE
JITP1
LEDM1
SP1
FAN3
FAN2
FAN4
FAN1
FAN5
JD1
JAUDIO1
JBR1
USB8/9(3.0)
OC_FRONT_PANEL
(3.0)
I-SATA0
I-SATA1
I-SATA2
I-SATA3
I-SATA4
I-SATA5
(3.0)
USB 2/3
USB 12/13
FAN1/CPU
PCH_SLOT2 PCI-E 2.0 X4
LAN
HDMI/DP
KB/MOUSE
AUDIO FP
DIMMB1
DIMMB2
HD AUDIO
USB4/5
USB6/7
DIMMA1
DIMMA2
CPU_SLOT1 PCI-E 3.0 X8
CPU_SLOT3 PCI-E 3.0 X16
COM1
VGA(IPMI)
USB 0/1
JI2C2
C7Z97-M
JPME2
JWD1
S8
S11
A. AUDIO FP
B. OC FRONT PANEL
A
Front Panel Audio Header (AUDIO
FP)
A 10-pin Audio header is supported on
the motherboard. This header allows you
to connect the motherboard to a front
panel audio control panet, if needed.
Connect an audio cable to the audio
header to use this feature (not supplied).
See the table at right for pin denitions
for the header.
10-in Audio
Pin Denitions
Pin# Signal
1 Microphone_Left
2 Audio_Ground
3 Microphone_Right
4 Audio_Detect
5 Line_2_Right
6 Ground
7 Jack_Detect
8 Key
9 Line_2_Left
10 Ground
OC Front Panel (OC FRONT PANEL)
This header is for the Over-Clocking (OC)
control panel, which is optional with the
motherboard. If available, attach the
control panel's cable to this header. The
OC control panel enables over-clocking
control and management from the front
of the chassis.
B