Supermicro Supero C7Z97-M - 2-9 Onboard Indicators

2-34
Supermicro C7Z97-M Series Motherboard User’s Manual
JTPM1
JIPMB1
S4
I-SATA3
I-SATA0
I-SATA1
JPL1
JPUSB1
JLED1
JVR2
JVR1
JPG1
JPAC1
JBT1
JSTBY1
JSD1
JF1
Rev. 1.00
BIOS
LICENSE
FOR HOME OR OFFICE USE
With FCC Standards Tested to Comply
JPW2
JL1
JL2
JI2C1
JSPDIF_OUT
JPW1
MAC CODE
BAR CODE
JITP1
LEDM1
SP1
FAN3
FAN2
FAN4
FAN1
FAN5
JD1
JAUDIO1
JBR1
USB8/9(3.0)
OC_FRONT_PANEL
(3.0)
I-SATA0
I-SATA1
I-SATA2
I-SATA3
I-SATA4
I-SATA5
(3.0)
USB 2/3
USB 12/13
FAN1/CPU
PCH_SLOT2 PCI-E 2.0 X4
LAN
HDMI/DP
KB/MOUSE
AUDIO FP
DIMMB1
DIMMB2
HD AUDIO
USB4/5
USB6/7
DIMMA1
DIMMA2
CPU_SLOT1 PCI-E 3.0 X8
CPU_SLOT3 PCI-E 3.0 X16
COM1
VGA(IPMI)
USB 0/1
JI2C2
C7Z97-M
JPME2
JWD1
S8
S11
A. LAN 1 LEDs
B. PWR LED
A
B
LAN 1 LEDs
One LAN port (LAN 1) is located on the
I/O back panel of the motherboard.
This LAN port has two LEDs. The yellow
LED indicates activity, while the Link
LED may be green, amber, or off to indi-
cate the speed of the connections. See
the tables at right for more information.
2-9 Onboard Indicators
Activity LEDLink LED
Onboard PWR LED Indicator
LED Status
Status Denition
Off System Off
On System on, or
System off and PWR
Cable Connected
Onboard Power LED (LED1)
An Onboard Power LED is located at
LED1 on the motherboard. When LED1
is on, the AC power cable is connected.
Make sure to disconnect the power cable
before removing or installing any compo-
nent. See the layout below for the LED
location.
GLAN Ports 1/2 Link Indicator
LED Settings
LED Color Denition
Off No Connection/10 Mbps/100
Mbps
Amber 1 Gbps
Green 10 Gbps.
GLAN 1/2 Activity Indicator
LED Settings
Color Status Denition
Yellow Flashing Active