Chapter 2: Installation
2-31
USB Wake-Up (JPUSB 1/2)
Use jumper JPUSB to activate the "wake-
up" function of the USB ports by pressing
a key on a USB keyboard or clicking the
USB mouse connected. This jumper is
used together with a USB Wake-Up fea-
ture in the BIOS. Enable this jumper and
the USB support in the BIOS to wake up
your system via USB devices.
Note: Use JPUSB1 for the USB ports on
the back panel, and JPUSB2 for the front
panel USB headers.
JTPM1
JIPMB1
S4
I-SATA3
I-SATA0
I-SATA1
JPL1
JPUSB1
JLED1
JVR2
JVR1
JPG1
JPAC1
JBT1
JSTBY1
JSD1
JF1
Rev. 1.00
BIOS
LICENSE
FOR HOME OR OFFICE USE
With FCC Standards
Tested to Comply
JPW2
JL1
JL2
JI2C1
JSPDIF_OUT
JPW1
MAC CODE
BAR CODE
JITP1
LEDM1
SP1
FAN3
FAN2
FAN4
FAN1
FAN5
JD1
JAUDIO1
JBR1
USB8/9(3.0)
OC_FRONT_PANEL
(3.0)
I-SATA0
I-SATA1
I-SATA2
I-SATA3
I-SATA4
I-SATA5
(3.0)
USB 2/3
USB 12/13
FAN1/CPU
PCH_SLOT2 PCI-E 2.0 X4
LAN
HDMI/DP
KB/MOUSE
AUDIO FP
DIMMB1
DIMMB2
HD AUDIO
USB4/5
USB6/7
DIMMA1
DIMMA2
CPU_SLOT1 PCI-E 3.0 X8
CPU_SLOT3 PCI-E 3.0 X16
COM1
VGA(IPMI)
USB 0/1
JI2C2
C7Z97-M
JPME2
JWD1
S8
S11
A
B
USB Wake-Up
Jumper Settings
Jumper Setting Denition
Pins 1-2 Enabled
Pins 2-3 Disabled (Default)
VGA Enable (JPG1)
Use jumper JPG1 to Enable or Disable
the onboard video port (C7Z97-MF Only).
Note: Options in the BIOS also con-
trol this feature. Please see "Internal
Graphics" on page 4-36.
VGA Enable
Jumper Settings
Jumper Setting Denition
Pins 1-2 Enabled (Default)
Pins 2-3 Disabled
A.USB Wak-Up
B. VGA Enable
To Next Page
Loading...
Need help?
General
