4-2
Supermicro C7Z97-M Series Motherboard User’s Manual
Except for the Home screen you may press the <F1> on any screen under
the Setup Section to see a list of Hot Keys that are available.
How To Change the Configuration Data
The conguration data that determines the system parameters may be
changed by entering the AMI BIOS GUI Setup utility. This Setup util-
ity can be accessed by pressing <Del> at the appropriate time during
system boot.
Note: For the purposes of this manual, options that are printed in
Bold are default settings.
How to Start the Setup Utility
Normally, the only visible Power-On Self-Test (POST) routine is the
memory test. As the memory is being tested, press the <Delete> key to
enter the main menu of the AMI BIOS GUI Setup Utility. From the Setup
Home screen, you can access the other Setup Sections.
The AMI BIOS GUI Setup Utility uses a mouse pointer navigation system
similar to standard graphical user interfaces. Hover and click an icon to
select a section, click a down arrow to select from an options list.
To Next Page
Loading...
