Supermicro Supero C7Z97-M - Voltage Configuration

4-24
Supermicro C7Z97-M Series Motherboard User’s Manual
Memory Overclocking
Load Memory Proles
Use this feature to set Performance Memory Proles which may cause
impact on memory behavior*. Select Automatic to allow the BIOS to
automatically set Performance Memory Proles. Select Manual to manu-
ally congure Performance Proles. The options are Automatic, Manual,
XMP Prole 1 and XMP Prole 2.
If Automatic is selected, the installed memory will run at 2200MHz if the
detected memory is rated at 2400MHz or above, and run at 1867MHz if
the memory detected is rated at 1867MHz.
If Manual, XMP Prole 1 or XMP Prole 2 is selected, the following op-
tions will be available. These options will only appear if XMP (Extreme
Memory Prole) Memory is/are installed:
Memory Clock
This option selects the Memory Clock Multiplier. The options are
133MHz and 100MHz.
*The C7Z97-M/MF supports memory modules having a frequency of more than 2133MHz
(Extreme Memory Prole or XMP Memory). However, XMP memory is not within the JEDEC
memory standard. Compatibility and stability of these memory modules depend on varying
factors, including the processor's capabilities and other devices installed.