Supermicro Supero X8DTU-F - View Bmc System Event Log

Chapter 4: AMI BIOS
4-21
View BMC System Event Log
This feature displays the BMC System Event Log (SEL). It shows the total number
of entries of BMC System Events. To view an event, select an Entry Number and
pressing <Enter> to display the information as shown in the screen.
•Total Number of Entries
•SEL Entry Number
•SEL Record ID
•SEL Record Type
•Event Timestamp
•Generator ID
•Event Message Format Version
•Event Sensor Type
•Event Sensor Number
•Event Directory Type
• Event Data.
Clear BMC Event Log
Select OK and press the <Enter> key to clear the BMC system log. Select Cancel
to keep the BMC System log. The options are OK and Cancel.
Caution: Any cleared information is unrecoverable. Make absolutely sure that you no
longer need any data stored in the log before clearing the BMC Event Log.
SetLANConguration
Use this feature to congure the IPMI LAN adapter with a network address as
shown in the following graphics.
Channel Number - Enter the channel number for the SET LAN Cong command.
This is initially set to [1].
Channel Number Status - This item displays the channel status for the Chan-
nel Number selected above: "Channel Number is OK" or "Wrong Channel
Number".