Supermicro Supero X8DTU-F User Manual

1-6
X8DTU/X8DTU-F User's Manual
Motherboard Features
CPU
• Two Intel
®
5500/5600 Series (LGA 1366) processors; each processor supports
two full-width Intel QuickPath Interconnect (QPI) links with a total of up to 51.2
GT/s Data Transfer Rate (6.4 GT/s per direction)
Memory
• Twelve 240-pin DIMM sockets support up to 192 GB* of DDR3 Registered ECC
or up to 48 GB of Unbuffered ECC/Non-ECC DDR3 1333 MHz/1066 MHz/800
MHz in 12 DIMM modules. (*Refer to Supermicro's memory recommendation
list posted on our website at www.supermicro.com. See Section 2-4 in Chapter
2 for DIMM Slot Population.)
Chipset
• Intel 5520 chipset, including: the 5520 (North Bridge) and the ICH10R (South
Bridge).
Expansion Slots
• One PCI-E 2.0 x16 slot (J2: SXB1)
• One PCI-E 2.0 x8 slot (J1: SXB2)
• One PCI-E 2.0 x8 in x4 slot (J3: SXB3)
BIOS
• 32 Mb AMI SPI Flash ROM
• PCI 2.3, ACPI 1.0/2.0/3.0, Plug and Play (PnP), DMI 2.3, USB Keyboard support,
Hardware BIOS Monitoring, and SMBIOS 2.3
PC Health Monitoring
• Onboard voltage monitors for CPU1 Vcore, CPU2 Vcore, CPU1 DIMM, CPU 2
DIMM, 5V, 5VSB, 12V, -12V, 3.3Vcc, 3.3VSB, VBAT and Vtt.
• Fan status monitor with rmware control
• CPU/chassis temperature monitors
• Platform Environment Control Interface (PECI) ready
• Thermal Monitor 2 (TM2) support
• CPU fan auto-off in sleep mode
• CPU slow-down on temperature overheat
• Pulse Width Modulation (PWM) Fan Control
• CPU thermal trip support for processor protection, power LED
• Power-up mode control for recovery from AC power loss
• Auto-switching voltage regulator for CPU cores
• System overheat/Fan Fail LED Indicator and control

Supermicro Supero X8DTU-F Specifications

General

Brand	Supermicro
Model	Supero X8DTU-F
Category	Motherboard
Language	English