Supermicro Supero X9SRH-7F - Boot Settings; Set Boot Priority; 1 St Boot Device, 2 Nd Boot Device, 3 Rd Boot Device, Etc; Add Boot Option

4-24
X9SRH Motherboard Series User’s Manual
4-6 Boot Settings
UsethisfeaturetocongureBootSettings:
Set Boot Priority
1st Boot Device, 2nd Boot Device, 3rd Boot Device, etc.
Use these items to specify the sequence of boot device priority.

Add Boot Option
This feature appears if the BIOS detects UEFI-capable devices. This allows the
usertodeneabootdevicefromwhichthesystemsbootsduringstartup.
Add Boot Option-Speciesthenameofthenewbootoption
Path for boot option - the path to the boot option in the format fsx:\path\
lename.e
Create-Choosethisafterdeningbothabovetocreatethebootoption.

Delete Boot Option
Thisfeatureallowstheusertodeleteapreviouslydenedbootdevicefromwhich
the systems boots during startup.
The options are Built-in EFI Shell,and[anyotherpre-denedbootdevice]
Network Devices, USB Device BBS Priorities, Hard Disk Drives
The above options appear when detected by the BIOS. Use these options to set the
order of the legacy network, USB, and Hard Disk Drive devices detected.