Supermicro Supero X9SRH-7F - Onboard Indicators; LAN Port Leds; IPMI Dedicated LAN Leds

Chapter 2: Installation
2-37
LAN Port LEDs
The LAN ports are located on the I/O
backpanel of the motherboard. Each Eth-
ernet LAN port has two LEDs. A blinking
Activity LED indicates there is data passing
through the port, while the Link LED may be
green, amber, or off to indicate the speed of
the connection. See the tables at right for
more information.
2-8 Onboard Indicators
LAN
Link LEDs (Green/Amber/Off)
LEDColorDenition
Off 100 Mbps
Amber 1 Gbps
Green 10 Gbps (if supported)
C
IPMI Dedicated LAN LEDs
In addition to the LAN ports, an IPMI Dedi-
cated LAN port is also located on X9SRH
series. The yellow LED on the right indi-
cates activity, while the green LED on the
left indicates the speed of the connection.
See the tables at right for more information.
LAN 1/LAN 2
IPMI LAN
(X8ST3-F)
Link LED
Activity LED
IPMI LAN
IPMI LAN Link LED (Left) &
Activity LED (Right)
StatusColorDenition
Link (Left) Green: Solid 100 Mbps
Activity
(Right)
Yellow: Blink-
ing
Active
A
B
Activity LED
Link LED
LAN
A. LAN1
B. LAN2
C.IPMI Dedicated LAN
Motherboard I/O Backpanel
Note: 10 Mbps is not supported.
10Gbps is only supported on
some motherboards.