3-6
X9SRH Motherboard Series User’s Manual
Proper Battery Disposal
Warning! Please handle used batteries carefully. Do
notdamagethebatteryinanyway;adamagedbattery
may release hazardous materials into the environment.
Do not discard a used battery in the garbage or a public
landll. Please comply with the regulations set up by
your local hazardous waste management agency to
dispose of your used battery properly.
Battery Installation
1. To install an onboard battery, follow the steps 1&
2 above and continue below:
2. Identify the battery's polarity. The positive (+) side
should be facing up.
3. Insert the battery into the battery holder and push
it down until you hear a click to ensure that the
battery is securely locked.
Warning: When replacing a battery, be sure to only
replace it with the same type.
Battery
Lock
Battery
Battery Holder
1
2
3-4 Battery Removal and Installation
Battery Removal
To remove the onboard battery, follow the steps below:
1. Power off your system and unplug your power
cable.
2. Locate the onboard battery as shown below.
3. Using a tool such as a pen or a small screwdriver,
push the battery lock outwards to unlock it. Once
unlocked, the battery will pop out from the holder.
4. Remove the battery.
Press down until
you hear a click.
This side up
To Next Page
Loading...
