Supermicro Supero X9SRH-7F - ACPI Features; Slow Blinking LED for Suspend-State Indicator; Power Supply

Chapter 1: Introduction
1-13
the Windows OS environment or used with Supero Doctor II in Linux. Supero
Doctor is used to notify the user of certain system events. For example, you can
also congure Supero Doctor to provide you with warnings when the system
temperature,CPUtemperatures,voltagesandfanspeedsgobeyondpredened
thresholds.
1-5 ACPI Features
ACPIstandsforAdvancedCongurationandPowerInterface.TheACPIspecica-
tion denes a exible and abstract hardware interface that provides a standard
way to integrate power management features throughout a PC system, including
its hardware, operating system and application software. This enables the system
to automatically turn on and off peripherals such as CD-ROMs, network cards, hard
disk drives and printers.
In addition to enabling operating system-directed power management, ACPI also
provides a generic system event mechanism for Plug and Play, and an operating
system-independentinterfaceforcongurationcontrol.ACPIleveragesthePlugand
Play BIOS data structures, while providing a processor architecture-independent
implementation that is compatible with Windows XP, Windows Vista and Windows
2008 Operating Systems.
Slow Blinking LED for Suspend-State Indicator
When the CPU goes into a suspend state, the chassis power LED will start to blink
to indicate that the CPU is in suspend mode. When the user presses any key, the
CPU will "wake up", and the LED will automatically stop blinking and remain on.
1-6 Power Supply
As with all computer products, a stable power source is necessary for proper and
reliable operation. It is even more important for processors that have high CPU
clock rates.
This motherboard accommodates 24-pin ATX power supplies. Although most
powersuppliesgenerallymeetthespecicationsrequired by the CPU, some are
inadequate. In addition, the 12V 8-pin power connector located at JPW2 is also
required to ensure adequate power supply to the system. Also your power supply
must supply 1.5A for the Ethernet ports.
It is strongly recommended that you use a high quality power supply that meets ATX
powersupplySpecication2.02orabove.ItmustalsobeSSIcompliant.(Formore
information, please refer to the web site at http://www.ssiforum.org/). Additionally, in
areas where noisy power transmission is present, you may choose to install a line