Supermicro Supero X9SRH-7F - Serial Port Console Redirection

Chapter 4: AMI BIOS
4-15
Auto,
IO=3F8h;IRQ=4;
IO=3F8h;IRQ=3,4,5,6,7,9,10,11,12;
IO=2F8h;IRQ=3,4,5,6,7,9,10,11,12;
IO=3E8h;IRQ=3,4,5,6,7,9,10,11,12;
IO=2E8h;IRQ=3,4,5,6,7,9,10,11,12;
The options for Serial Port 2 are:
Auto,
IO=2F8h;IRQ=3;
IO=3F8h;IRQ=3,4,5,6,7,9,10,11,12;
IO=2F8h;IRQ=3,4,5,6,7,9,10,11,12;
IO=3E8h;IRQ=3,4,5,6,7,9,10,11,12;
IO=2E8h;IRQ=3,4,5,6,7,9,10,11,12;

Serial Port Console Redirection
COM1, COM2, or SOL Console Redirection
Use this feature to enable console redirection for COM1, COM2, and SOL ports. The
options are Enabled and Disabled. The default for COM1 and COM2 is Disabled.
The default for SOL is Enabled.

Console Redirection Settings
CongurethefollowingoptionsfortheConsoleRedirectionSettings.The
most common settings are set as default:
Terminal Type : Select ANSI, VT100, VT100+, or VT-UTF8
Bits per Second (BPS): 9600, 19200, 38400, 57600, or 115200
Data Bits: 8 or 7
Parity: None, Even, Odd, Mark, or Space
Stop Bits: 1 or 2
Flow Control: None or Hardware RTS/CTS
VT-UTF8 Combo Key Support: Enabled or Disabled
Recorder Mode: Disabled or Enabled