Supermicro Supero X9SRH-7F - Blink Leds (Range 0-15 Seconds); Change Attempt Order; Delete Attempts; Intel(R) Intel Ethernet Controller X540-AT2

Chapter 4: AMI BIOS
4-19
Boot LUN - This is the target's LU number in Hexadecimal format.
Authentication Type - Select CHAP or None.
If CHAP is selected above:
CHAP Type - Select One Way or Mutual.
CHAP Name - Assign a name for this authentication.
CHAP Secret-Assignasecretwordthatisalsodenedinthetarget
iSCSI device. Minimum length is 12 bytes and maximum is 16 bytes.
Whennished,selectSaveChangesandselectBacktoPreviousPage.
Delete Attempts
Thisfeaturedeletespreviouslydenedattemptsasabove.
Change Attempt Order
This feature changes the order in which several iSCSI connection attempts are
made.
Intel(R) Intel Ethernet Controller X540-AT2/
Intel(R) Intel Ethernet Controller X540-AT2
NICConguration
Link Speed
Use this feature to select the link speed to be used. The options are Au-
toNeg, 10 Mbps Half, 10 Mbps Full, 100 Mbps Half and 100 Mbps Full.
Wake On LAN
Use this feature to activate the Wake On LAN (WOL) feature. The op-
tions are Enabled, and Disabled.
Blink LEDs (Range 0-15 seconds)
PleasespeciestheblinkrateoftheNICLED.Selectfron1-15second
intervals.
PortCongurationInformation
ThissectiondisplaysthecurrentcongurationoftheNetworkInterface.