Supermicro SuperServer 2029TP-HC0R - Server Chassis Features; Control Panel

11
Chapter 1: Introduction
Control Panel Features
Item Feature Description
1 Power Button
The main power button on each of the control panels is used to apply or remove power from
󰀨
the main power, but keeps standby power supplied to the system. The power button has a
built-in LED which will turn green when the power is on
2 NIC LED 
3 Information LED See the following table for the status shown by this LED.
4 UID Button
󰀨
blue light function of the LED. This light is displayed in the front as part of the UID button and
with a separate LED at the rear of the node. The light helps locate the node in large racks and
server banks.
Figure 1-1. Control Panel View
1.4 Server Chassis Features
Control Panel
The switches and LEDs located on the control panel are described below. See Chapter 4 for
details on the control panel connections.
1
4
3
2