Supermicro SuperServer 2029TP-HC0R - Serial Port

62
SuperServer 2029TP-HTR/HC1R/HC0R User's Manual
VGA Port
The onboard VGA port is located next to IPMI_LAN on the I/O back panel. Use this connection
for VGA display.
Serial Port
A COM port (COM1) is located next to the VGA port on the motherboard. This COM port

COM Port
Pin Denitions
Pin# Denition Pin# Denition
1 DCD 6 DSR
2 RXD 7 RTS
3 TXD 8 CTS
4 DTR 9 RI
5 Ground 10 N/A
Back Panel USB (3.0)
Pin Denitions
Pin# Denition Pin# Denition
1 VBUS 10 Power
2 D- 11 󰀨
3 D+ 12
4 Ground 13 Ground of PWR Return
5 StdA_SSRX- 14 SuperSpeed Receiver
6 StdA_SSRX+ 15 󰀨
7 GND_DRAIN 16 Ground for Signal Return
8 StdA_SSTX- 17 SuperSpeed Transmitter
9 StdA_SSTX+ 18 󰀨
Universal Serial Bus (USB) Ports
Two USB 3.0 port (USB0/1) are located on the I/O back panel. Connect appropriate cables
here to use USB support. (USB cables are not included).