Supermicro SuperServer 2029TP-HC0R - Air Shroud

SuperServer 2029TP-HTR/HC1R/HC0R User's Manual
47
Figure 3-7. Installing the Air Shroud
Air Shroud
󰀩
not require screws to set up.
Installing the Air Shroud
1. 
1. Make sure that the motherboard expansion card (if applicable) and all components are
properly installed in each motherboard node.
2. If necessary, move any cables that interfere with the air shroud placement.
3. 

4. Repeat the procedure for the remaining three motherboard nodes.
5. Reroute any cables that were moved and replace the chassis cover.
Air Shroud Components