Supermicro SuperServer 2029TP-HC0R - LED Indicators

65
Chapter 4: Motherboard Connections
Manufacturing Mode Select



Manufacturing Mode Select
Jumper Settings
Jumper Setting Denition
Pins 1-2 Normal (Default)
Pins 2-3 Manufacturing Mode
4.5 LED Indicators
LAN LEDs
Two LAN ports (LAN 1 and LAN 2) are located on the I/O back panel of the motherboard.
Each Ethernet LAN port has two LEDs. The green LED indicates activity, while the other Link
󰀨
below for more information.
Dedicated IPMI LAN LEDs
In addition to LAN1 and LAN2, an IPMI LAN is also located on the I/O back panel. The
amber LED on the right of the IPMI LAN port indicates activity, while the green LED on the
left indicates the speed of the connection. See the table below for more information.
IPMI LAN
Activity LEDLink LED
LAN 1/LAN 2
IPMI LAN
(X8ST3-F)
LAN1/2 Activity LED (Right)
LED State
Color Status Denition
Green Flashing Active
LAN1/2 Link LED (Left)
LED State
LED Color Denition
Green 10Gbps
Yellow/Amber 1Gbps
IPMI LAN LEDs
LED Color/State Denition
Link (left)
Green: Solid
Amber: Solid
100 Mb/s
1Gbps
Activity (right) Amber: Blinking Active