9
Chapter 1: Introduction
Chapter 1
Introduction
1.1 Overview
This chapter provides a brief outline of the functions and features of the 2029TP-HTR/HC1R/HC0R.
The 2029TP-HTR/HC1R/HC0R is based on the X11DPT-PS motherboard and the
CSE-217HQ+-R2K20BP3 chassis.
In addition to the motherboard and chassis, several important parts that are included with
the system are listed below.
Main Parts List
Description Part Number Quantity
SC217HQ+ TwinPro 2pcs air shroud MCP-310-21707-0B 4
80x80x38mm 16.5K RPM chassis middle fan FAN-0183L4 4
1U Passive CPU Heat Sink with a Middle Air Channel and
a Narrow Retention Mechanism
SNK-P0067PSM 4
1U Passive CPU Heat Sink with a Narrow Retention
Mechanism
SNK-P0067PS 4
2U Twin Square Backplane, supports 24 SAS3/SATA3 2.5"
HDD
BPN-SAS3-217HQ2 1
Backplane adapter card with six (6) HDD ports
BPN-ADP-6SATA3P (HTR)
BPN-ADP-S3108L-H6IRP (HC1R)
BPN-ADP-S3008L-L6IP (HC0R)
4
Hot-swap 2.5" HDD trays MCP-220-00047-0B 24
Riser cards
RSC-P-6 4
RSC-R1UTP-E16R 4
Rail set MCP-290-00053-0N 1
1.2 Unpacking the System
Inspect the box the SuperServer 2029TP-HTR/HC1R/HC0R was shipped in and note if it was
the carrier who delivered it.
Decide on a suitable location for the rack unit that will hold the server. It should be situated
in a clean, dust-free area that is well ventilated. Avoid areas where heat, electrical noise and
Be sure to read the precautions and considerations noted in Appendix B.
To Next Page
Loading...
