15
Chapter 1: Introduction
Quick Reference Table
Jumper Description Default Setting
JBT1 CMOS Clear Open (Normal)
JPME1 Manufacturing Mode Select Pins 1-2 (Normal)
Connector Description
BT1 Onboard battery
COM1 COM port (COM1) on the I/O backplane
FAN3 System cooling fan header
IPMI_LAN Dedicated IPMI LAN port (IPMI_LAN1)
I-SATA4/I-SATA5 Intel® PCH SATA3.0 ports with power-pin built-in w/support of SuperDOM (Device-On Module)
JHS1 SMCI-Proprietary Power supply header
JRK1 RAID_Key for onboard SATA devices
JSDCARD1 BMC_SD card header
JSIOM1 Super I/O Module used as CPU1 PCI-E 3.0 x16 slot
JTPM1 Trusted Platform Module/Port 80 connector
JUIDB1
SXB1 (for S-SATA 0-5) PCI-E 3.0 x8 slot supported by CPU1 for use of S-SATA 0-5 devices
SXB2 (for I-SATA 0-3) PCI-E 3.0 x16 slot supported by CPU2 for use of I-SATA 0-3 devices
SXB3_1 PCI-E 3.0 x16 slot supported by CPU1
SXB3_2 PCI-E 3.0 x8 slot supported by CPU2
SXB4 PCI-E 3.0 x16 slot supported by CPU2
USB0/1 Backplane Universal Serial Bus (USB) 3.0 ports 0/1
VGA VGA Port
LED Description State: Status
BMC_HB_LED BMC Heartbeat LED Blinking Green: BMC Normal
UID_LED1
To Next Page
Loading...
