134
SuperServer 2029TP-HTR/HC1R/HC0R User's Manual
Appendix C
System Specications
Processors
Dual Intel® Xeon Socket P (LGA 3647) supported processors
Note: The 2029TP-HTR/HC1R/HC0R system does not support Omni-Path Fabric CPUs.
Chipset
Intel C621 chipset
BIOS
128 Mb AMI® Flash ROM
Memory
Integrated memory controller supports up to 2 TB of 3DS LRDIMM/RDIMM/NVDIMM DDR4 (288-pin) ECC
2666/2400/2133 MHz modules in sixteen (16) slots at up to 128GB at 1.2V.
Note: For the latest CPU/memory updates, please refer to our website at http://www.supermicro.com/products/motherboard.
SATA Controller
On-chip (Intel C621) controller
Drive Bays
Twenty-four (24) hot-swap drive bays
PCI Expansion Slots
The following PCI-E slots are available on the serverboard:
• One (1) PCI-Express 3.0 x8 slot supported by CPU1 for use of S-SATA 0-5 devices (SXB1)
• One (1) PCI-Express 3.0 x16 slot supported by CPU2 for use of I-SATA 0-3 devices (SXB2)
• One (1) PCI-Express 3.0 x16 slot supported by CPU1 (SXB3_1)
• One (1) PCI-Express 3.0 x8 slot supported by CPU2 (SXB3_2)
• One (1) PCI-E 3.0 x16 slot supported by CPU2 (SXB4)
Motherboard
X11DPT-PS; Micro ATX form factor: 6.8" x 18.86" (172.7 mm x 479 mm)
Chassis
CSE-217HQ+-R2K20BP3; 2U Rackmount,
Dimensions: (WxHxD) 17.25 x 3.47 x 28.5 in. (438 x 88 x 724 mm)
System Cooling
Four (4) 8-cm PWM fans
Power Supply
Model: PWS-2K20A-1R
AC Input Voltages: 100-127 VAC, 200-240VAC
Rated Input Current: 14-11A (100-127V), 12.5-9.5A (200-240V)
Rated Input Frequency: 50-60 Hz
Rated Output Voltages (+12V, +5Vsb): 1200W: 100-127VAC/14-11A; 1800W: 200-220VAC/10-9.5A; 1980W; 220-230VAC/10-
9.8A; 2090W: 230-240VAC/10-9.8A; 2090W: 200-220VAC/14-11A(UL/cUL use only); 2200W: 220-240VAC/12-11A(UL/cUL use
only)
Operating Environment
Operating Temperature: 0º to 35º C (50º to 95º F)
Non-operating Temperature: -40º to 60º C (-40º to 140º F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)
To Next Page
Loading...
