Supermicro SuperServer 2029TP-HC0R - Hard Drive Carrier Indicators

44
Chapter 3: Maintenance and Component Installation
Hard Drive Carrier Indicators
Each hard drive carrier has two LED indicators: an activity indicator and a status indicator. In

󰀨
LED Color State Status
Activity LED Blue Solid On SAS/NVMe drive installed
Blue Blinking I/O activity
Status LED Red Solid On Failed drive for SAS/SATA/NVMe with RSTe
support
Red Blinking at 1 Hz Rebuild drive for SAS/SATA/NVMe with RSTe
support
Red Blinking with two blinks and
one stop at 1 Hz
Hot spare for SAS/SATA/NVMe with RSTe support
Red 󰀨 Power on for SAS/SATA/NVMe with RSTe support
Red Blinking at 4 Hz Identify drive for SAS/SATA/NVMe with RSTe
support
Green Solid On Safe to remove NVMe device
Amber Blinking at 1 Hz Attention state—do not remove NVMe device