Supermicro SuperServer 2029TP-HC0R - Page 56

56
Chapter 3: Maintenance and Component Installation
6. Replace with the new SIOM module desired and put the SIOM bracket back in place.
Secure the bracket with its two screws (from step 5) using about 3-pounds of torgue and
a slow speed (if using a power tool) or manually using a screwdriver.
7. Flip the chassis and secure the sled back using its two screws (from step 3).
8. Put the Pulling Ear back in place and secure it using its screw at the SIOM mounting
bracket (from step 2).
9. 
Figure 3-16. Replace the Screws and Secure the SIOM Bracket