SuperServer 2029TP-HTR/HC1R/HC0R User's Manual
74
Port 61h Bit-4 Emulation
Select Enabled for I/O Port 61h-Bit 4 emulation support to enhance system performance. The
options are Enabled and Disabled.
Power Conguration
Watch Dog Function
Select Enabled to allow the Watch Dog timer to reboot the system when it is inactive for more
than 5 minutes. The options are Enabled and Disabled.
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Power-Off for
power to be turned on after a power loss. Select Last State to allow the system
to resume its last power state before a power loss. The options are Power-On,
and Last State.
Power Button Function
This feature controls how the system shuts down when the power button is pressed. Select 4
as the user presses the power button. The options are 4 Seconds Override and Instant O.
Throttle on Power Fail
Select Enabled to decrease system power input by throttling CPU frequency when the power
supply fails. The options are Enabled and Disabled.
To Next Page
Loading...
