88
Chapter 5: Software
4. During Windows Setup, continue to the dialog box where you select the drives on which
to install Windows. If the disk you want to use is not listed, click on “Load driver” link at
the bottom left corner.
Figure 5-2. Load Driver Link
To load the driver, browse the USB ash drive for the proper driver les.
• Choose the SATA/sSATA AHCI driver indicated and then choose the storage drive on
which you want to install it.
5. Once all devices are specied, continue with the installation.
6. After the Windows OS installation has completed, the system will automatically reboot
multiple times for system updates.
To Next Page
Loading...
