EasyManua.ls Logo

Supermicro X11DPG-QT - Page 241

Supermicro X11DPG-QT
259 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix G: Conguring iSCSI Settings
241
Initiator IP Address (available when Enable DHCP is set to Disabled)
Use this feature to enter the desired iSCSI initiator IP address.
Enable DHCP
Use this feature to disable/enable dynamic host conguration protocol (DHCP) server service
for the iSCSI initiator. The options are Disabled and Enabled.
Note: Set the feature, Enable DHCP, to Disabled if you would like to specify the iSCSI
initiator IP address/subnet mask/gateway.

Table of Contents

Related product manuals