EasyManuals Logo

Supermicro X11DPG-QT User Manual

Supermicro X11DPG-QT
259 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #76 background imageLoading...
Page #76 background image
Super X11DPG-QT User's Manual
76
Chapter 4
UEFI BIOS
4.1 Introduction
This chapter describes the AMIBIOS™ Setup utility for the X11DPG-QT motherboard. The
BIOS is stored on a chip and can be easily upgraded using a ash program.
Note: Due to periodic changes to the BIOS, some settings may have been added
or deleted and might not yet be recorded in this manual. Please refer to the Manual
Download area of our website for any changes to BIOS that may not be reected in
this manual.
Starting the Setup Utility
To enter the BIOS Setup Utility, hit the <Delete> key while the system is booting up. (In
most cases, the <Delete> key is used to invoke the BIOS setup screen. There are a few
cases when other keys are used, such as <F1>, <F2>, etc.) Each main BIOS menu option
is described in this manual.
The Main BIOS screen has two main frames. The left frame displays all the options that can
be congured. “Grayed-out” options cannot be congured. The right frame displays the key
legend. Above the key legend is an area reserved for a text message. When an option is
selected in the left frame, it is highlighted in white. Often a text message will accompany it.
(Note that the AMI BIOS has default text messages built in. We retain the option to include,
omit, or change any of these text messages.) Settings printed in Bold are the default values.
A " " indicates a submenu. Highlighting such an item and pressing the <Enter> key will
open the list of settings within that submenu.
The BIOS setup utility uses a key-based navigation system called hot keys. Most of these
hot keys (<F1>, <F2>, <F3>, <F4>, <Enter>, <ESC>, <Arrow> keys, etc.) can be used at
any time during the setup navigation process.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Supermicro X11DPG-QT and is the answer not in the manual?

Supermicro X11DPG-QT Specifications

General IconGeneral
PS/2 ports quantity0
IPMI LAN (RJ-45) portYes
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity2
Number of SATA III connectors10
Number of DIMM slots16
Maximum LRDIMM memory2000 GB
Supported RDIMM module capacity64GB
Memory voltage1.2 V
Supported memory typesDDR4-SDRAM
Supported memory clock speeds2133, 2400, 2666 MHz
BIOS typeAMI
ACPI version4.0
BIOS memory size64 Mbit
RAID levels0, 1, 5, 10
Wi-FiNo
LAN controllerIntel® X550
Ethernet interface type10 Gigabit Ethernet
On-board graphics card modelAspeed AST2500
Bundled softwareIntel Node Manager, IPMI2.0, KVM LAN, NMI, SPM, SSM, SUM, SuperDoctor 5, Watchdog
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)10 - 35 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)8 - 90 %
Supported QPI10.4 GT/s
Processor socketLGA 3647 (Socket P)
Processor manufacturerIntel
Processor number of cores supported28
Component forServer
Motherboard chipsetIntel® C621
Audio output channels7.1 channels
PCI Express x16 (Gen 3.x) slots6
Weight and Dimensions IconWeight and Dimensions
Depth335.3 mm
Width384 mm

Related product manuals