EasyManuals Logo

Supermicro X11DPG-QT User Manual

Supermicro X11DPG-QT
259 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #93 background imageLoading...
Page #93 background image
Chapter 4: UEFI BIOS
93
Coherency Support (Non-Isoch)
Select Enable for the Non-Iscoh VT-d engine to pass through DMA (Direct Memory
Access) to enhance system performance. The options are Enable and Disable.
Intel® VMD technology
This section describes the conguration settings for the Intel Volume Management
Device (VMD) Technology.
Note: After you’ve enabled VMD on a PCIe slot of your choice, this PCIe slot will be
dedicated for VMD use only, and it will no longer support any PCIe device. To re-activate
this slot for PCIe use, please disable VMD.
Intel® VMD for Volume Management Device on CPU1
VMD Cong for PStack0
Intel® VMD for Volume Management Device
Select Enable to use the Intel Volume Management Device Technology for this stack.
The options are Disable and Enable.
*If the feature "Intel® VMD for Volume Management Device" is set to Enable,
the following features will be available:
CPU1 SLOT2 PCI-E 3.0 x16 VMD (Available when the device is detected by
the system)
Select Enable to use the Intel Volume Management Device Technology for this de-
vice. The options are Disable and Enable.
Hot Plug Capable (Available when the device is detected by the system)
Use this feature to enable the hot plug support for PCIe root ports 1A~1D. The op-
tions are Disable and Enable.
VMD Cong for PStack1
Intel® VMD for Volume Management Device
Select Enable to use the Intel Volume Management Device Technology for this stack.
The options are Disable and Enable.
*If the feature "Intel® VMD for Volume Management Device" is set to Enable,
the following features will be available:
CPU1 SLOT4 PCI-E 3.0 x16 VMD (Available when the device is detected by
the system)
Select Enable to use the Intel Volume Management Device Technology for this de-
vice. The options are Disable and Enable.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Supermicro X11DPG-QT and is the answer not in the manual?

Supermicro X11DPG-QT Specifications

General IconGeneral
PS/2 ports quantity0
IPMI LAN (RJ-45) portYes
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity2
Number of SATA III connectors10
Number of DIMM slots16
Maximum LRDIMM memory2000 GB
Supported RDIMM module capacity64GB
Memory voltage1.2 V
Supported memory typesDDR4-SDRAM
Supported memory clock speeds2133, 2400, 2666 MHz
BIOS typeAMI
ACPI version4.0
BIOS memory size64 Mbit
RAID levels0, 1, 5, 10
Wi-FiNo
LAN controllerIntel® X550
Ethernet interface type10 Gigabit Ethernet
On-board graphics card modelAspeed AST2500
Bundled softwareIntel Node Manager, IPMI2.0, KVM LAN, NMI, SPM, SSM, SUM, SuperDoctor 5, Watchdog
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)10 - 35 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)8 - 90 %
Supported QPI10.4 GT/s
Processor socketLGA 3647 (Socket P)
Processor manufacturerIntel
Processor number of cores supported28
Component forServer
Motherboard chipsetIntel® C621
Audio output channels7.1 channels
PCI Express x16 (Gen 3.x) slots6
Weight and Dimensions IconWeight and Dimensions
Depth335.3 mm
Width384 mm

Related product manuals