EasyManuals Logo

Supermicro X9DA7 User Manual

Supermicro X9DA7
109 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #89 background imageLoading...
Page #89 background image
Chapter 4: AMI BIOS
4-17
PCH RAID CodeBase
Select Intel to use Intel PCH RAID settings for onboard RAID support.
The default setting is Intel.
Port 0~5 Hot Plug
Select Enabled to enable hot-plug support for the particular port. The
options are Enabled and Disabled.
SCU Conguration
SCU Devices
Select Enabled to enable support for PCH SCU (System Conguration Utility) de-
vices. The options are Disabled and Enabled.
OnChip SAS Oprom
Select Enabled to support the onboard SAS Option ROM to boot up the system via
a storage device. The options are Disabled and Enabled.
PCIe/PCI/PnP Conguration
PCI ROM Priority
Use this feature to select the Option ROM to boot the system when there are mul-
tiple Option ROMs available in the system. The options are EFI Compatible ROM
and Legacy ROM.
PCI Latency Timer
Use this feature to set the latency Timer of each PCI device installed on a PCI bus.
Select 64 to set the PCI latency to 64 PCI clock cycles. The options are 32, 64, 96,
128, 160, 192, 224 and 248.
Above 4G Decoding (Available if the system supports 64-bit PCI decoding)
Select Enabled to decode a PCI device that supports 64-bit in the space above 4G
Address. The options are Enabled and Disabled.
PERR# Generation
Select Enabled to allow a PCI device to generate a PERR number for a PCI Bus
Signal Error Event. The options are Enabled and Disabled.
SERR# Generation
Select Enabled to allow a PCI device to generate an SERR number for a PCI Bus
Signal Error Event. The options are Enabled and Disabled.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Supermicro X9DA7 and is the answer not in the manual?

Supermicro X9DA7 Specifications

General IconGeneral
Microphone inYes
PS/2 ports quantity2
Serial ports quantity1
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 2.0 connectors3
Integrated SAS ports8
Number of SATA II connectors6
Maximum UDIMM memory128 GB
Number of DIMM slots16
Supported RDIMM clock speeds800, 1066, 1333, 1600 MHz
Supported DIMM module capacities16GB, 1GB, 2GB, 32GB, 4GB, 8GB
PCI Express slots version3.0
Memory voltage1.35, 1.5 V
Maximum RDIMM memory512 GB
Supported memory typesDDR3-SDRAM
BIOS typeAMI
ACPI version4.0
BIOS memory size128 Mbit
RAID levels0, 1, 5, 10
Supported storage drive interfacesSerial Attached SCSI (SAS)
Wi-FiNo
LAN controllerIntel® I350
Ethernet interface typeGigabit Ethernet
Cables includedFireWire, SATA
Bundled softwareSuperDoctor® III Watch Dog, NMI
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)10 - 35 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)8 - 90 %
Supported QPI6.4, 7.2, 8 GT/s
Processor socketLGA 2011 (Socket R)
Intel Xeon seriesE5-2600
Processor manufacturerIntel
Processor thermal power (max)150 W
Processor number of cores supported4, 6, 8
Component forWorkstation
Motherboard chipsetIntel® C602
Audio output channels7.1 channels
Motherboard form factorExtended ATX
Sustainability certificatesRoHS
Weight and Dimensions IconWeight and Dimensions
Depth332 mm
Width305 mm

Related product manuals