1-6
X9SRW Motherboard Series User’s Manual
Motherboard Jumpers
Jumper Description Default
JI2C2/JI2C3 SMB to PCI Slots On (Enabled)
JPG1 Onboard VGA Enable Pins 1-2 (On)
JPL1 LAN1 Enable Pins 1-2 (Enabled)
JPME1 Intel ME Mode Select Pins 1-2 (Normal)
UID Unit ID Switch Off (Disabled)
JWD Watch Dog Timer Reset Pins 1-2 (Reset)
JPB1 IPMI/BMC Enable Pins 1-2 (Enabled)
JP3 BIOS Recover Pins 2-3 (Normal)
JWP1 BIOS Write Protect Pins 1-2 (Normal)
JBT1 CMOS Clear See Chapter 2
J29 VRM SMB Clock (to BMC or PCH) Pins 1-2 (BMC, Normal)
J30 VRAM SMB Data (to BMC or PCH) Pins 1-2 (BMC, Normal)
Motherboard LED Indicators
LED Description Color/State Status
LED2 Standby 3.3V Power Green/Steady Standby Power
LE1 Power LED Green/Steady System is On/Running
LE2 UID LED Blue/Steady UID Switch is On
BD1 IPMI Heartbeat Green/Blinking IPMI is enabled
To Next Page
Loading...
