Supero C7X99-OCE User Manual

Chapter 4: AMI BIOS
4-35
sSATA Port 0~ Port 3
This item displays the information detected on the installed on the
sSATA port. specied by the user.
•Model number of drive and capacity
•Software Preserve Support
sSATA Port 0~ Port 3
Select Enabled to enable an sSATA port specied by the user. The
options are Disabled and Enabled.
sSATA Port 0 ~ Port 3 Spin Up Device
On an edge detect from 0 to 1, set this item to allow the PCH to start
a COMRESET initialization to the device. The options are Enabled and
Disabled.
Port 0 ~ Port 3 sSATA Device Type
Use this item to specify if the sSATA port specied by the user should
be connected to a Solid State drive or a Hard Disk Drive. The options
are Hard Disk Drive and Solid State Drive.
*If the item above "Congure sSATA as" is set to IDE, the following
items will display:
sSATA Port 0~ Port 3
This item indicates that an sSATA port specied by the user is installed
(present) or not.
Port 0 ~ Port 3 sSATA Device Type (Available when a SATA
port is detected)
Use this item to specify if the sSATA port specied by the user should
be connected to a Solid State drive or a Hard Disk Drive. The options
are Hard Disk Drive and Solid State Drive.

Supero C7X99-OCE Specifications

General

Brand	Supero
Model	C7X99-OCE
Category	Motherboard
Language	English