Chapter 4: AMI BIOS
4-21
Memory Overclocking
Load Memory Proles
Use this feature to set Performance Memory Proles which may cause
impact on memory behavior*. Select Automatic to allow the BIOS to
automatically set Performance Memory Proles. Select Manual to manu-
ally congure Performance Proles. The options are Automatic, Manual,
XMP Prole 1 and XMP Prole 2.
If Automatic is selected, the installed memory will run at 2133MHz if the
detected memory is rated at 2400MHz or above, and run at 1867MHz if
the memory detected is rated at 1867MHz.
If Manual, XMP Prole 1 or XMP Prole 2 is selected, the following op-
tions will be available. These options will only appear if XMP (Extreme
Memory Prole) Memory is/are installed:
To Next Page
Loading...
