Chapter 4: AMI BIOS
4-37
BIOS Features
Bootup Numlock State
This option sets the state to which the NumLock key is congured when
booting. The default is checked (Activated).
Quiet Boot
This option sets the state to which the system buzzer is congured when
booting. The default is checked (On), the buzzer is silent.
AddOn ROM Display Mode
This item sets the display mode for the Option ROM. Select Keep Current
to use the current AddOn ROM Display setting. Select Force BIOS to use
the Option ROM display mode set by the system BIOS. The options are
Force BIOS and Keep Current.
Wait for "F1" for Error
This option sets whether the system will wait for the user to press "F1"
when an error is detected during POST. The default is checked (On).
Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles the boot disk function.
When this item is set to Enabled, the ROM BIOS of the host adaptors will
"capture" Interrupt 19 at bootup and allow the drives that are attached
To Next Page
Loading...
Need help?
General
