4-58
Supermicro X10SRA/X10SRA-F Motherboard User’s Manual
Erasing Settings
Erase Event Log
Select Enabled to erase all error events in the SMBIOS (System Man-
agement BIOS) log before an event logging is initialized at bootup. The
options are No and Yes.
When Log is Full
Select Erase Immediately to immediately erase all errors in the SMBIOS
event log when the event log is full. Select Do Nothing for the system
to do nothing when the SMBIOS event log is full. The options are Do
Nothing and Erase Immediately.
SMBIOS Event Log Standard Settings
Log System Boot Event
Select Enabled to log system boot events. The options are Disabled
and Enabled.
MECI (Multiple Event Count Increment)
Enter the increment value for the multiple event counter. Enter a number
between 1 to 255. The default setting is 1.
METW (Multiple Event Count Time Window)
This item is used to determine how long (in minutes) should the multiple
event counter wait before generating a new event log. Enter a number
between 0 to 99. The default setting is 60.
Note: Please reboot the system for the changes to take effect.
To Next Page
Loading...
Need help?
General
