Supero X10SRA - NIC Configuration

4-56
Supermicro X10SRA/X10SRA-F Motherboard User’s Manual
NIC Conguration
There are two options under this link:
Link Speed
Select Auto Negotiated to allow the port to auto-congure its speed
depending on the actual speed supported on the connected network.
The options are Auto Negotiated, 10Mbps Half, 10 Mbps Full, 100
Mbps Half and 100Mbps Full.
Wake on LAN (WOL)
Select Enabled to activate this feature, which enables the system to
'wake up' from sleep when it receives a LAN wake up signal through
this port. The options are Disabled, and Enabled.
Blink LEDs
To pin point exactly which port these settings apply to, this feature will
ash the corresponding LED on the LAN port associated with these BIOS
settings. Please enter a numeric value, in seconds.
Port Conguration Information
Port status and other information are displayed in this area:
UEFI Driver, Adapter PBA, Chip Type, PCI Device ID, PCI address, Link
Status, MAC Address and Virtual MAC Address.